python 1600xp diagram
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115342
Printed Date: May 15, 2025 at 12:01 PM
Topic: python 1600xp diagram
Posted By: 55chevrolet
Subject: python 1600xp diagram
Date Posted: July 28, 2009 at 11:36 PM
I installed this alarm into my 96 Neon and now I am getting rid of this car for a truck(1993 Dodge Ram W250 diesel). The problem is, that I cannot find the installation guide that had the wiring diagram. I could possibly track down the wires that I have hooked up into my car and transpose them into my truck, but I would rather start from scratch. I am also installing the remote start module again. i believe the numbers that i am looking for of that is the xprs 500m? ANYWAYS, If someone could post or point me in the right direction for the wiring diagram for this alarm, this would be greatly apprectiated! Also, beings that it is a diesel, i would need to know what i need to do so I can use the remote start function. I do remember that it asked for the glow plug and a tach wire. Thanks in advance.
Replies:
Posted By: JWorm
Date Posted: July 29, 2009 at 12:16 AM
Click on the top of the page where it says "Downloads". Search for "Python". Go to last one in list and it says "881xp". Same alarm/remote start but a different remote (2-way). Everything is installed the same way so you can use that guide.
Posted By: 55chevrolet
Date Posted: July 29, 2009 at 9:06 AM
thanks a bunch! hopefully it will answer all my questions. I looked over it and it seems to have everything that I need.
|