Print Page | Close Window

1996 dodge ram 1500 power locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115408
Printed Date: July 12, 2025 at 4:31 AM


Topic: 1996 dodge ram 1500 power locks

Posted By: babs
Subject: 1996 dodge ram 1500 power locks
Date Posted: August 01, 2009 at 2:28 PM

i am trying to put on a  dei remote start on a 1996 dodge ram. i have the starter on and works, i am trying to wire in the power locks and cant get them to work. every thing i find says its a type C locks. i have it wired now, but  when i leave the plug unpluged just the passanges side works fine with remote. light blue plug in drivers kick. when i plug it in and try it it blows fuses. any help would be great. thanks



Replies:

Posted By: t&t tech
Date Posted: August 01, 2009 at 4:26 PM

schematics, How do you have it wired? Does the unit have on board relays or are you using off board relays?




Posted By: babs
Date Posted: August 01, 2009 at 4:55 PM
i am trying to use off board relays. i have tried type A, type C, and the posted_image Actuators / Reverse Polarity and every time i work the locks by remote it blows a fuse. but when i have the light blue plug unpluged the passanger side works but when i plug it in it blows fuse



Posted By: babs
Date Posted: August 01, 2009 at 5:00 PM
i can not find the on board relays.



Posted By: t&t tech
Date Posted: August 01, 2009 at 5:20 PM

don't bother with the on board relays! i was just asking! also, how do you have your relays setup !




Posted By: t&t tech
Date Posted: August 01, 2009 at 5:25 PM
posted_image



Posted By: t&t tech
Date Posted: August 01, 2009 at 5:26 PM
should resemble that



Posted By: babs
Date Posted: August 02, 2009 at 8:06 AM
i had them set like this
posted_image
 
 



Posted By: babs
Date Posted: August 02, 2009 at 8:10 AM

then i done one like this.  but i did not cut the wires  from the lock to motor just tied them in, and got the same result.

posted_image




Posted By: babs
Date Posted: August 02, 2009 at 8:12 AM
sorry i am wrong i did not do one like this i did one in the book it was type A



Posted By: babs
Date Posted: August 02, 2009 at 11:42 AM
T&T thanks for the help. i got it working



Posted By: t&t tech
Date Posted: August 02, 2009 at 3:17 PM
you're welcome!


Print Page | Close Window