Print Page | Close Window

06 silverado duramax viper 5901 xk01

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115413
Printed Date: May 10, 2024 at 7:29 AM


Topic: 06 silverado duramax viper 5901 xk01

Posted By: Accord_boy619
Subject: 06 silverado duramax viper 5901 xk01
Date Posted: August 01, 2009 at 3:47 PM

Sorry if this has been posted, but I seared and I couldn't find wut Im really lookin for. Here wut Im planning on:

2006 Silverado Crew Cab Diesel LT1
I want to install Viper 5901 and XK01

I want remote windows also, can I control the 4 windows with the XK01? If so How do I do that? Or do I have to use 2 530Ts and run wires to each door? From wut Ive read the XK01 is needed for my truck is this true? And any other advise is welcome.

Thanx.



Replies:

Posted By: xicano21
Date Posted: August 01, 2009 at 5:23 PM
you can only control the front windows with the xko1 module, you would need an extra 530t to make the back windows work




Posted By: Accord_boy619
Date Posted: August 01, 2009 at 6:12 PM
How do I make the XK01 control the windows? I read the manual and it just list firmwares for it.




Posted By: xicano21
Date Posted: August 01, 2009 at 7:19 PM

you would extend the door lock pulses from the xko1 module, hook up the module to the alarm and you will have to enable that option from the programming menu on the xko1 and then program the alarm to comfort closure on .

What part of SD are you from ? Im in the North county





Posted By: Accord_boy619
Date Posted: August 02, 2009 at 12:29 AM
I grew up in National City but Im in Vegas now, Im in the USAF. So if I want more controlabiliy of the windows I should just get 2 530Ts? Or can I use the 5th and 6th channel of the alarm with the XK01? I want to be able to drop all the windows or if I want just the fronts but roll up all with (arm signal). Yeah Im makin it complicated sorry, did it like this on a Colorado but it was the base model so I didnt have to use any bypass modules.




Posted By: Accord_boy619
Date Posted: August 02, 2009 at 2:10 AM
Oh and whats the deference between the XK01 and the XK06?




Posted By: ajstetler
Date Posted: August 02, 2009 at 10:34 AM
XK01 will do Passlock, door locks, heated seats, window-roll up, things like that on compatible vehicles. The XK06 will only bypass Passlock without all the extras.

BTW the you can use the windows roll up option on the XK01 with 1 relay by following the firmware instructions for your truck. I would go with the XK01 on your truck.

-------------
Big Al




Posted By: Accord_boy619
Date Posted: August 03, 2009 at 11:16 AM
Thanx for the replies.




Posted By: another-kelly
Date Posted: August 06, 2009 at 12:08 AM
the xk01 will put the windows up if you hit lock twice on the remote but will not put them down. and i have a viper 5701 w/ an xk01 in my 0 sierra (5.3L gasser)




Posted By: Chris Luongo
Date Posted: August 06, 2009 at 5:58 AM
Sounds like everyone's answered your questions, but just to clarify:

XK06 is only a little cheaper than XK01, and doesn't do doorlocks.....definitely get the XK01.

XK01 will roll your windows up, but not down. The instructions show you to wire up a relay. You also have to enable the feature in the XK01's programming.

Not sure if the XK01 does all four windows on that truck or just the two fronts.

If you want full control of the windows (up/down whenever you want) you'd need window module(s). The front window motor wires are only available inside the doors. Rear doors I'm not sure.

I read somewhere on another forum (from two pro installers) that the 530T won't work on that truck, and you'd instead need a 529T for each window. I'm sorry I don't have any further information to explain why......but that's what I heard.





Posted By: another-kelly
Date Posted: August 06, 2009 at 9:29 AM
Chris Luongo wrote:


Not sure if the XK01 does all four windows on that truck or just the two fronts.



it'll do all four windows. my '06 is a crew cab. it's kinda weird tough, it does both fronts at the same time, then the back ones individually. make sure to keep the window lock switch off for it to work right





Print Page | Close Window