2002 camry trunk release wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115422
Printed Date: July 04, 2025 at 10:22 AM

Topic: 2002 camry trunk release wiring

Posted By: niran916
Subject: 2002 camry trunk release wiring
Date Posted: August 02, 2009 at 3:38 AM

Hello,

I want to hook up the wiring so that my alarm could use the trunk release function. It works with the stock key fob. What color wires would I need to tap into? I also have a radio shack 4 pin relay, can that be used?

Thanks,

Gary.

Replies:

Posted By: howie ll
Date Posted: August 02, 2009 at 8:14 AM

First ascertain whether the switch output wire is pos triggered, neg triggered or a motor wire (it sits on ground) also the appprox current draw when it's energise, also what alarm, somw brands have a 10amp pos trunk release wire, most are 120 milliamps neg going.

Posted By: i am an idiot
Date Posted: August 02, 2009 at 9:07 AM

https://www.the12volt.com/installbay/forum_posts.asp?tid=54&KW=camry+trunk+release

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: richl68
Date Posted: August 02, 2009 at 9:50 AM

Trunk/Hatch Release

WHITE/ blue

5wi

driver kick panel

Posted By: niran916
Date Posted: August 02, 2009 at 11:40 AM

richl68 wrote:

Trunk/Hatch Release WHITE/ blue 5wi driver kick panel

Thanks for the replies, I hooked the WHITE/ blue wire to #30 and blew the fuse. Am I not hooking it up correctly? heres how I hooked it up...

I have 86 and 87 hooked up to constant 12V, 85 hooked up to < size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book>(-) 200mA trunk release output, and #30 hooked up to trunk release wire.

< size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book>

< size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book>Thanks.

Posted By: niran916
Date Posted: August 02, 2009 at 11:44 AM

I forgot to mention the alarm that is installed is a Clifford Matrix 1x.

Thanks.

Posted By: i am an idiot
Date Posted: August 02, 2009 at 12:04 PM

Look at the picture in the following link. https://www.the12volt.com/installbay/forum_posts.asp?tid=88389&KW=camry+trunk+5 You will have to get a new relay.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: niran916
Date Posted: August 02, 2009 at 12:14 PM

Thanks, I understand I have to hook it up reversal style.

Posted By: howie ll
Date Posted: August 02, 2009 at 1:05 PM

OK you need a 5pin rely A.K.A type 87a.

RED / white from alarm to 85,

12volt + constant with a 15amp fused supply to 87 and 86,

Release switch side of WHITE/ blue to 87a and

Trunk side of WHITE/ blue to 30.

You obviously didn't read the comments I posted on my first reply about seeing what the wire does, I think I mentioned "motor wire" which would be sitting on ground, thus blowing fuses.

Posted By: niran916
Date Posted: August 02, 2009 at 2:14 PM

I just got done with installing the relay and it now works. I just wanted to thank everyone again, this really helped me out.

Thanks. posted_image