2005 matrix xr starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115428
Printed Date: April 17, 2024 at 4:28 PM
Topic: 2005 matrix xr starter
Posted By: ryoder
Subject: 2005 matrix xr starter
Date Posted: August 02, 2009 at 6:01 PM
I recently installed a compustar remote start with Key-override-all bypass on a 2005 Matrix, and am having problems with the bypass unit. Specifically, the unit programs, but fails to bypass the transponder (inserting a key into the ignition allows the car to remote start). The connector diagram in the Fortin manual shows only one empty pin (#3), but my 7-pin connector only has 3 wires (and 4 empty slots)! Does anyone know the correct colors of the car's wires for the Rx and Tx connections? I am unable to determine which wires are the #4 and #5 wires, given that no indication is provided for the #1 pin.
Thank you.
Replies:
Posted By: profuse007
Date Posted: August 02, 2009 at 8:54 PM
pin 4 blue: code
pin 5 green: tx
got it from idatalink.com
------------- Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: ryoder
Date Posted: August 03, 2009 at 5:44 AM
Thank you--I will try these wires asap.
Ryan
|