removing viper 600 siren

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115518
Printed Date: May 13, 2025 at 11:43 AM

Topic: removing viper 600 siren

Posted By: jayslx1
Subject: removing viper 600 siren
Date Posted: August 07, 2009 at 2:32 PM

I have an old VIper 600 alarm system and I want to remove the siren as I never use the alarm any longer. The system is equipped with starter kill. If I remove the siren will the door lock feature still work or will the starter kill activate?

Thanks.

Replies:

Posted By: draasch
Date Posted: August 07, 2009 at 2:35 PM

if its not an all in one unit, you should be able to without any problems.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: jayslx1
Date Posted: August 07, 2009 at 2:41 PM

thanks, the heat from the engine bay of 18 years finally destroyed the mount and I found it hanging on my plug wires (91 Mustang)...............I only use it for door lock/unlock feature.

Posted By: jayslx1
Date Posted: August 07, 2009 at 3:35 PM

correction its a viper 300 system, purchased in 1992.

Posted By: draasch
Date Posted: August 07, 2009 at 5:45 PM

doesnt matter, you will be fine

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window