Print Page | Close Window

2008 chevy colorado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115519
Printed Date: April 20, 2024 at 6:08 AM


Topic: 2008 chevy colorado

Posted By: draasch
Subject: 2008 chevy colorado
Date Posted: August 07, 2009 at 2:32 PM

Has anyone installed power door locks on this year truck??? They have cables and i di not see a point that i can use an aftermarket motor. Any ideas would be great!

Thanks

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Replies:

Posted By: Mark Mizenko
Date Posted: August 07, 2009 at 3:21 PM

You can use a "cable adapter kit".  Basically, you cut the outside sheath away, and reveal the wire rod inside, and attach your actuator to that.  The kit includes a bracket and two retainer clips that will keep the 2 seperate outside sheaths apart and in place. and you mount the bracket to the door.




Posted By: draasch
Date Posted: August 07, 2009 at 3:26 PM
where did u find it?

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: Mark Mizenko
Date Posted: August 08, 2009 at 12:46 PM

They're available thru a few different distributors.  DEI's part# is 524CL.   1 Kit has brackets for 2 doors.


Print Page | Close Window