programming 2 way remote code alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115579
Printed Date: April 19, 2024 at 6:42 AM

Topic: programming 2 way remote code alarm

Posted By: gsbartender
Subject: programming 2 way remote code alarm
Date Posted: August 10, 2009 at 3:59 PM

Hello. About 7 years ago I purchased a code alarm 2 way car alarm for my honda civic. It has a Proximity on it and it has worked fine. I just had the car totally redone with a new paint job. I also put a new battery in it because the car was dead. Over the past 7 years I lost my remote and one actually broke so I purchased a new code alarm 2 way remote that look just like the one I had in years past. However I am having a problem programming it. Any suggestions??? The remote came with very very vague instructions so I figured Id ask a some pro's at it .

Replies:

Posted By: skwearl
Date Posted: August 11, 2009 at 5:28 PM

brand and model please.

Posted By: gsbartender
Date Posted: August 11, 2009 at 6:21 PM

skwearl wrote:

brand and model please.

Not sure what model it is exactly.. Ido know it did use this remote before it broke. https://www.autoalarmpro.com/inc/sdetail/1222 but I am trying to program this remote with it which I also had before it broke https://www.autoalarmpro.com/inc/sdetail/619 the car alarm is about 7years old.. good old circuit city convinced me into purchasing this over a viper :(((

Posted By: gsbartender
Date Posted: August 12, 2009 at 12:49 PM

Posted By: 09f150
Date Posted: August 13, 2009 at 9:03 AM

this website has all of the manuals for the Code Alarm systems, you just need to sign up for a username/account for access:

https://techservices.codesystems.com/

see if you can look under your dash and find the brain unit and see what model number is on it