2009 mazda 6 pushbutton start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115661
Printed Date: April 28, 2024 at 2:57 AM
Topic: 2009 mazda 6 pushbutton start
Posted By: carteksvalpo
Subject: 2009 mazda 6 pushbutton start
Date Posted: August 15, 2009 at 12:47 PM
Hey everyone.....Just a little heads up.
I installed an Audiovox 687 RS/Keyless in a 2009 Mazda 6 w/ Push Button start yesterday. Used Flashlogic FL-CAN module. There wasn't software available for this car as of yet. I called iData, they had a beta version available to flash the module with. They actually took the time to upload the software onto the website for me, so I could flash.
Here's the lowdown......Everything worked perfect. Remote started fine, locks worked, tach worked. Brake wire through data wasn't correct, had to hardwire in. Also, couldn't use datalink port, had to hardwire the module in.
Customer called today stating that the only window that would roll down is the drivers window, and the "Auto-Down" feature was inop. So, I'm waiting for Monday to come so I can call iData and see if they've come across this in their testing. Just a heads up!!
Replies:
Posted By: robertsc
Date Posted: August 16, 2009 at 9:59 AM
Did you disconnect the battery or any factory modules?
Posted By: groundzero2010
Date Posted: January 11, 2010 at 4:23 PM
Is there any new information on install data on the 2009 Mazda 6 w/push start?
Posted By: metz35
Date Posted: January 11, 2010 at 8:59 PM
idatalinks instructions
|