I need  help to install Python 1400xp r/s with Omega IM05 PKT2 in camry 2004 GLi 4cyl  2.4L  2AZ-FE.
1-there is no thin BLACK / YELLOW wire as a second starter in the ignition harness. Its a thin BLACK/ Orange , Its give 12v+ with cranck. I connected by relay 5wi with Purple wire ( starter relay trigger) in remote start.
2- I can't found 2 wires In ICM to connect with Omega module wires : 
Violet data IMI output wire, Violet/White data IMI input wire, & Orange data IMO wire.
What is the meaning of : IMI , IMO.
thanks
These is all wires in camry ICM module :  
Plug E6 :
======
Pin No.     Color:
--------     -------
1             Black / Red (thick)
3             Black / Yellow (thick)
5             Black / Orange
6             Li Blue
7             White / Li Blue
8             Black / White
9             Black / Orange ..................................Tach wire
10           Green / Red 
11           Green / Red
12           Black / Yellow 
14           Brown
17           White 
18           Red 
19           Pink / Black 
Plug E7 :
======
Pin No.     Color:
--------     -------
2             Blue / Yellow 
7             Pink / Blue
8             Yellow
9             Blue / White 
10           White / Blue 
11           Red / Black 
14           Yellow / Green 
15           Green / White 
16           Violet...........................................security light
17           Violet / White 
19           Green / White 
21           Blue / Yellow 
27           Red / Blue 
29           Green / Orange 
31           Blue / White 
32           Yellow / Black 
33           Li blue
34           Li blue
Plug E9 :
======
Pin No.     Color:
--------     -------
1             White  (thick)
2             Black   (thick)
4             Li blue (thick)
7             Brown (thick)
8             Black / Orange 
9             Black / Yellow 
14           Yellow 
15           Li blue / Black 
16           Li blue / Red 
17           Li blue / Yellow 
18           Pink 
19           Red / Black 
23           Black 
24           Red 
25           White / Blue 
26           Red 
27           Black
29           Red / White  
34           Li green
35           White  
Plug E10 :
======
Pin No.     Color:
--------     -------
1             Li blue (thick)
2             Red  (thick)
3             Yellow  (thick)
4             White  (thick)
5             White  
6             White / Black 
7             White / Black
8             Red / White 
9             Pink 
10           Green / Black
11           Li blue / Yellow 
12           Black / Red  
13           Blue
14           Yellow 
15           Black / White 
16           Yellow / Black
17           Yellow / Red 
18           Yellow ( Pige )
19           Green 
20           Blue / Black
21           Li green
23           White / Red  
26           Yellow 
27           Red  
28           Brown 
30           Green 
34           Green
Second starter wire:   If you want, just unfasten the plastic cover around the ignition switch........follow that BLACK/ orange or BLACK / YELLOW you found, all the way up to the igntion switch plug.
If the wire you found is plugged right into the ignition switch, it must be the right one.
Immobilizer wires:  Most U.S. Camrys of that vintage didn't get the immobilizer.  (Only the SE V6, LE V6, and all XLE models.)  Not sure about what would be in Saudi Arabia.
Does this Camry have a flashing red light in the dashboard that says SECURITY?
      thanks for replay
Yes ..the BLACK/ orange wire .. its with igntion switsh wires in the plug.
This car .. It is have a red security light in dashboard , in side heater switch.
I think It is nearly like camry 2001-2002 ECM wires.. maybe...We must change the Omega module to 555u Or 555x.
thanks