07 dodge ram with no starter wire
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115738
Printed Date: May 16, 2025 at 1:22 AM
Topic: 07 dodge ram with no starter wire
Posted By: jromero1297
Subject: 07 dodge ram with no starter wire
Date Posted: August 18, 2009 at 4:03 PM
Replies:
Posted By: i am an idiot
Date Posted: August 18, 2009 at 4:44 PM
 | Accessory 1 | VIOLET/BROWN | (-) | IGNITION HARNESS |  | ||||
| Starter 1 | YELLOW/GRAY | (+) | GRAY PLUG NEAR BATTERY, NOT FOR REMOTE START | | ||||
| Starter 2 | VIOLET/BROWN | (-) | IGNITION HARNESS |
If you notice the Acc wire and the starter 2 wire are the same wire, the notes say to ground that wire through a 100 ohm resistor for start. Ground the same wire throught a 610 Ohm resistor for Acc.
Ground terminal 85 and 30 of each relay. 86 of the start relay connects to the start wire of your remote start unit. Connect the 100 ohm resistor to terminal 87. Coneect the other end of the resistor to the Violet/Brown wire.
86 of the Acc relay connects to the Acc wire of the remote start unit. 87 connects to the 610 ohm resistor. The other end of the 610 ohm resistor connects to the Violet/Brown wire.
Key sense also uses the same wire. The resistor value for that is 8.5K
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB