2008 dodge magnum
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115859
Printed Date: May 12, 2024 at 7:07 AM
Topic: 2008 dodge magnum
Posted By: berto1230781
Subject: 2008 dodge magnum
Date Posted: August 23, 2009 at 7:47 PM
Hey guys i'm installing some subs and amp on this car again it' a 2008 Dodge Magnum and i need to know how to take out the factory radio so i can hook up my remote turn on wire to this radio my first time doing this car and i'm stuck don't want to break anything and if u have any other suggestion other then using the amp turn on wire of the factory radio let me know thanks
-------------
roberto gonzalez
Replies:
Posted By: mikvot
Date Posted: August 23, 2009 at 8:44 PM
The bezel around the radio just unsnaps. Grab the bezel down by the pocket or ashtray opening and pull out. Not too hard though.
Posted By: ajstetler
Date Posted: August 23, 2009 at 10:31 PM
Well considering there is no accessory behind the radio, that may be a problem. And no, none at the ignition harness either. Try a differential converter, or tag the aux power harness, I believe those are accy/ignition controlled.
-------------
Big Al
Posted By: yimke
Date Posted: August 24, 2009 at 11:20 AM
Grab it from a switched power Cigarette lighter. If you have one.
|