UltraStar 2250 problem, Leds stay on

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11591
Printed Date: May 09, 2025 at 11:10 AM

Topic: UltraStar 2250 problem, Leds stay on

Posted By: ruben17
Subject: UltraStar 2250 problem, Leds stay on
Date Posted: March 28, 2003 at 8:54 PM

Hello Guys,

I installed an UltraStart 2250 alarm. It was working allright for a week. But last night I couldn't arm it.
The antenna leds stayed on all night. When I press the lock button the lights spark once but the siren won't chirp. If I open a door the alarm won't Trigger.
The alarm is not arming, i don't know what happened, it worked OK for a week.
What could've gone wrong if it was working allright???

If somebody had this same problem please let me know.

I appreciate your help. Thanks:^:

Replies:

Posted By: jrilla
Date Posted: March 29, 2003 at 9:35 AM

Sounds like it is in valet mode, check your manual for how to enter and exit.

-------------
J Rilla

Owner/Installer

Posted By: iskidoo
Date Posted: March 29, 2003 at 8:32 PM

Or call AST for tech support from the front of your manual and they will walk you through it.

Posted By: ruben17
Date Posted: March 30, 2003 at 10:53 PM

Sorry for my stupid question. It was on valet mode posted_image

I just did not thought of that because I don't remeber putting it on Valet Mode.

Thanks a lot for your help guys posted_image

Print Page | Close Window