viper 211 hv wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115997
Printed Date: September 18, 2025 at 11:00 AM

Topic: viper 211 hv wiring

Posted By: 80_vette
Subject: viper 211 hv wiring
Date Posted: August 30, 2009 at 2:18 PM

Hello,

Great site! I am wiring a viper 211HV to a 2002 Ford Taurus. The car has power door locks W/O keyless entry. I am mainly interested in the keyless entry feature of this system. I have located the 26 pin plug at the GEM module that controls the power lock circuit. I am not quite sure which wires from the module to connect to the 26 pin plug. I have the red + and black - connected. Are there any other wires that need to be connected to +12 or gnd. Any help greatly appreciated.

Thanks,

Les

-------------
les

Replies:

Posted By: Mark Mizenko
Date Posted: August 30, 2009 at 8:54 PM

Get the installation manual from directed.com

Hook the Purple and Purple black wire to (-)

then hook the

GREEN/ Black to the Pink / YELLOW

and the

Blue/Black to the Pink/Green

Posted By: 80_vette
Date Posted: August 31, 2009 at 8:11 PM

Thanks for the help, the keyless door feature now works fine. Do you know if the trunk lock can be wired in and activated thru the aux button on the keypad. The car has electric trunk release.

Les

Posted By: Mark Mizenko
Date Posted: September 01, 2009 at 12:05 PM

RED / White is the (-)Aux output from the module for channel 2.