start activation
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116005
Printed Date: September 08, 2025 at 7:30 AM
Topic: start activation
Posted By: prdjr165
Subject: start activation
Date Posted: August 30, 2009 at 7:42 PM
Replies:
Posted By: i am an idiot
Date Posted: August 30, 2009 at 8:00 PM
You can use the actual motor wire and put a relay on it to convert the positive to a negative.
 | Driver Mtr Unlock | LT.GREEN/ BLUE | (REV) | PLUG ABOVE FUSEBOX | |||||
| Driver Mtr Lock | LT.GREEN/ DK.GREEN | (REV) | PLUG ABOVE FUSEBOX |
| Convert a Positive Output to a Negative Output |
If you have a switch or an alarm or keyless entry that has a positive output that you wish to use to switch a device that requires a ground such as a horn, dome light, parking lights, head lights, hatch release, etc., wire a relay as shown below to convert the positive output (trigger) to a negative output.  Here's the same configuration showing a positive output from an alarm or remote keyless entry used to activate a vehicle's parking light relay that requires a ground to turn the lights on.  |
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Posted By: prdjr165
Date Posted: August 30, 2009 at 8:25 PM
Posted By: prdjr165
Date Posted: August 31, 2009 at 11:59 AM