viper 1002 needed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116081
Printed Date: May 15, 2024 at 11:13 AM
Topic: viper 1002 needed
Posted By: dx90
Subject: viper 1002 needed
Date Posted: September 03, 2009 at 2:26 PM
I fitted my alarm and all was working well except for the 1st worn away stage on the built-in anti-shock was not working. Full impact was. I didn't mind this, rather than take it out and send it back.
Now I have a new problem.
The blue LED stopped working and when I open the doors with the key to set the alarm off the alarm doesn't work any more. I have also tried the alarm by opening the bonnet press the switch down arm the car and then release the switch. Still no alarm.
The remote locks through the alarm still work fine.
Anyone know what the problem could be please?
Or who to get in touch with in the UK to get it repaired under guarantee?
Thanks
-------------
BMW E36 320I August build 1995
Replies:
Posted By: t&t tech
Date Posted: September 03, 2009 at 8:30 PM
Could it be in valet mode? The led shuts off some time after the alarm has been in this mode for an extended period!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: dx90
Date Posted: September 05, 2009 at 5:29 AM
Hi t&t tech
Spot on with the alarm being in valet mode. The switch is hidden up behind a panel. Not sure how it got knocked when ignition was on, but it must have been some how and switched it to valet mode.
Thanks for your help.
-------------
BMW E36 320I August build 1995
|