03 mustang v6 door triggers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116088
Printed Date: June 07, 2024 at 8:06 PM

Topic: 03 mustang v6 door triggers

Posted By: kjkomodo
Subject: 03 mustang v6 door triggers
Date Posted: September 03, 2009 at 8:34 PM

Hi, I found an old post (from 2005), which I have a question about. Anyway, "BLACK/ white at GEM is All door trigger, L door Yel/Blk, R door Gry/Red, Trunk Brn/Wht. (Trunk has to be diode isolated)." Don't the doors have to be isolated? Any advantages to splicing both door pins, rather than the All door pin? (with the proper polarity trigger wire from the remote start, of course). Sorry, this just didn't add up to me.

Thanx

Replies:

Posted By: howie ll
Date Posted: September 04, 2009 at 7:17 AM

Yes, please refer to DEI tech sheet # 1076, available from this site.

Posted By: KarTuneMan
Date Posted: September 04, 2009 at 12:15 PM

Here....

Print Page | Close Window