03 mustang v6 oem disarm wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116134
Printed Date: July 09, 2025 at 7:40 PM
Topic: 03 mustang v6 oem disarm wire
Posted By: kjkomodo
Subject: 03 mustang v6 oem disarm wire
Date Posted: September 06, 2009 at 1:45 PM
Hi, I found about 8 different resources saying that 03 Mustang factory alarm disarm wire is at GEM/BCM 20 pin plug pin 16. I've got everything else hooked up, including wires at this plug, but there is no wire in that pin and I can't find any dk grn/vio wire on the GEM. Is it in one of the three connectors behind drivers kick panel? Not built in on a V6 model? I just ran into a thread where a guy needed wire info for an 01 and it said "at R.K.E." I don't know if my car has it or where it might be but i suppose it's a possibility.
Thanks in advance
Replies:
Posted By: yimke
Date Posted: September 06, 2009 at 10:32 PM
Do you even have a factory alarm? Or is there just a little blinking light on the dash making you think you have one?
Roll the windows down, lock the door with the keyfob, wait 2 minutes then try to unlock the door without the key and open it from the outside.
viola
Posted By: kjkomodo
Date Posted: September 07, 2009 at 5:05 PM
HAHAHA. Didn't go off. OH MAN THATS FUNNY! Thanks for your time. lol
|