Print Page | Close Window

1998 toyota sienna / valet 561r

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116191
Printed Date: July 20, 2025 at 6:10 AM


Topic: 1998 toyota sienna / valet 561r

Posted By: gassaver
Subject: 1998 toyota sienna / valet 561r
Date Posted: September 08, 2009 at 12:17 PM

Going to be installing a Valet 561R into my father in laws 1998 Toyota Sienna, however its says it requires the hook up of a Netural Saftey switch. Anyone know which wire that would be, or is that just for a manual vehicle? Thanks in advance.



Replies:

Posted By: fcss
Date Posted: September 08, 2009 at 1:49 PM

Are u talking about the BLACK/ white on the 561r?  If so the 561r remote start unit comes with a switch put one end of the switch to ground and the other side to the BLACK/ white of the 561r.  It will turn the remote sart off and you cant start it wit the remote example if your bringing it in for service or something. where the hood will needed to be opened.  

Or just put the BLACK/ white of the 561r to ground and forget the switch.  I would do a hood pin then. But I would do the switch anyway.


Print Page | Close Window