deleting remote viper 5901

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116192
Printed Date: July 20, 2025 at 1:49 AM

Topic: deleting remote viper 5901

Posted By: dvaldez0989
Subject: deleting remote viper 5901
Date Posted: September 08, 2009 at 12:52 PM

trying to delete remotes from a 5901. on page 36 of the install guide it tell you that it is the second step in the pair remotes. i have tried everything and i cant seem to get them to delete. i am assuming you dont need the remote because that would be redundant if i lost it. any help would be appreciated

Replies:

Posted By: jim hunter
Date Posted: September 08, 2009 at 3:45 PM

you need 1 working remote to delete all remotes from programming thewn you would have to reprogram that one remote you have and want to use, if youhave no remotes just program the new remote when you get it the max number of times that the remote memory holds(so if it hold 4 remotes program the one you get 4 times ) etc

Posted By: dvaldez0989
Date Posted: September 08, 2009 at 4:35 PM

i have one remote but i cant seem to get them to delete what is the steps in doing this?? i put the remote in pair remote mode and the car in delete remotes and that is far as i got after that i dont know what to do. andy advice??

Posted By: snisen02
Date Posted: September 09, 2009 at 2:37 PM

if you only have one transmitter that is not programmed into your system you will have to program that remote first - exit programming - enter menu for deleting all transmitters - delete all transmitters - then reprogram your remote again... seems tedious but only takes a min to do all of that...

Print Page | Close Window