1999 pontiac montana remote start gmdaa
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116215
Printed Date: July 18, 2025 at 11:52 PM
Topic: 1999 pontiac montana remote start gmdaa
Posted By: rmarcelle05
Subject: 1999 pontiac montana remote start gmdaa
Date Posted: September 09, 2009 at 3:12 PM
I put in an UltraStart remote starter in a 1999 pontiac montana and I used a leftover gmdaa (data) for the pk3 bypass and now it starts and other times it doesn't. Is there a keysense wire that has to be hooked up? What wire would I hook up to that if that is needed?
-------------
Tantrum
Replies:
Posted By: kgerry
Date Posted: September 10, 2009 at 5:22 PM
when it doesn't start have you isolated whether it is a Transponder issue or a tach issue? does the model require a keysense wire to be connected? most data solutions do not...
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: rmarcelle05
Date Posted: September 10, 2009 at 6:40 PM
it starts sometimes and dies the next and the passkey light flashes, it turns out other then being outdated (obsolete) the module was only designed for 2000+ montanas, hence the reason why it partly works, i guess. I chose to go with a 555g (dei) that should work
-------------
Tantrum
|