Print Page | Close Window

viper 5002 lcd remote problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116237
Printed Date: November 06, 2025 at 4:07 AM


Topic: viper 5002 lcd remote problem

Posted By: jcs091570
Subject: viper 5002 lcd remote problem
Date Posted: September 10, 2009 at 2:01 AM

I just recently installed a Viper 5002..the antenna cord is fully extended, the dipole antenna is mounted top center of windshield. The one way remote communicates fine but the paging remote has very poor range and you have to point it directly at the vehicle to get it to transmit. You also have to press the button several times before it transmits. The only tint on the glass is factory smoked glass along the top of the windshield.  I am considering deleting this transmitter and re assigning it to see if it makes any difference. Would appreciate any input or ideas on what the problem is. thanks



Replies:

Posted By: t&t tech
Date Posted: September 12, 2009 at 1:16 PM
Have you checked the battery?

-------------


Print Page | Close Window