Print Page | Close Window

Aladdin 2000: Starter Interrupt help.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11624
Printed Date: September 01, 2025 at 5:31 PM


Topic: Aladdin 2000: Starter Interrupt help.

Posted By: s13 240
Subject: Aladdin 2000: Starter Interrupt help.
Date Posted: March 30, 2003 at 12:13 AM

Hi, just want to say that this is a great site and it seems like there is a lot of knowledgeable people here so I would like to ask a few questions.

 It's about installing an Aladdin 2000 into my '92 Nissan 240sx. I put an alarm in my other '90 240sx but that was a bit different than the Aladdin.

My question is do I need to use the starter interrupt relay that was included? I've read about it but I'm not sure how it works and what it does.

I think I need to use it, then my second question would be how do I hook it up? Does anyone know if my car has a second start wire or second ignition?

One last question about using a turbo timer with this system. I have a Greddy FATT, how can I use both the turbo timer and have the alarm work?

Thank You. :^:




Replies:

Posted By: jrilla
Date Posted: March 30, 2003 at 9:11 AM
The starter kill relay is not necessary, but what it does is it opens the starter circuit making the thief hot wire your car the old fashioned way. You have 2 starter wires, so you would need 2 relays to accomplish this.




ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |
|              12V|white               |+ |ignition harness            |
|          STARTER|BLACK/ white        |+ |ignition harness            |
|   SECOND STARTER|BLACK / YELLOW        |+ |ignition harness            |
|        IGNITION|BLACK/ red           |+ |ignition harness            |
|        ACCESSORY|blue               |+ |ignition harness            |
|       POWER LOCK|ORANGE / black   *1   |F |driver's kick panel        |
|     POWER UNLOCK|same wire      *1   |F |                            |
| PARKING LIGHTS +|RED / blue            |   |back of dash dimmer        |
|       HEADLIGHTS|grn/yel, grn/blue   |+ |steering column             |
|     DOOR TRIGGER|RED / white           |- |courtesy light              |
| TRUNK/HATCH PIN|red                 |- |sw. or light in trunk       |
|       TACHOMETER|yellow/red          |   |ECM pass. kick panel        |
|       BRAKE WIRE|RED / green           |+ |brake pedal switch          |
|     HORN TRIGGER|GREEN / WHITE        |- |steering column             |
|           WIPERS|lt. GREEN/ red       |- |steering column             |
| LF WINDOW UP/DN|green, blue        |   |driver's door switch        |
| RF WINDOW UP/DN|RED / white, RED / black|   |dr. door or kick panel      |
|        RADIO 12V|RED / black           |+ |radio                      |
|     RADIO GROUND|                    |   |                            |
|     RADIO SWITCH|blue               |+ |radio                      |
| RADIO ILLUMINATE|RED / blue            |+ |radio                      |
|    POWER ANTENNA|BLACK/ red           |+ |radio                      |
|       LF SPEAKER|brn/wht - brown     |   |radio                      |
|       RF SPEAKER|blu/wht - blu/yel   |   |radio                      |
|       LR SPEAKER|purple - pink       |   |radio                      |
|       RR SPEAKER|red - green        |   |radio                      |


Notes:
*1 To operate, open (cut) the org/blk wire and the doors will lock, pulse the same wire to ground and the doors unlock.

-------------
J Rilla

Owner/Installer



Posted By: s13 240
Date Posted: March 30, 2003 at 11:19 PM

Humm I'm still a little confused. I would need 2 relays? How would I connect them?

Thanks for the wiring diagram.




Posted By: s13 240
Date Posted: March 30, 2003 at 11:23 PM

Hi, I was wondering how to hook up a turbo timer with this system. I have the Greddy Full Auto Turbo Timer, how can I use both the turbo timer and have the alarm work?

I did a searched for help with this but I did not find much.

Thanks




Posted By: Velocity Motors
Date Posted: March 31, 2003 at 12:18 PM
Instead of placing the disable relay on the starter wires, install it on the ignition wire. This will have the same end result.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: s13 240
Date Posted: March 31, 2003 at 1:39 PM

Thank you for the reply Jeff. Would you be refering to diagram 1 or 2 on page 18 of the Aladdin install manual? Or something different?

Just wanted to make sure.




Posted By: Velocity Motors
Date Posted: April 01, 2003 at 8:31 AM
No, use diagram 6 on page 20 and instead of the starter wire use the main IGN wire in it's place.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window