Print Page | Close Window

2005 ram, remote start won’t start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116485
Printed Date: July 17, 2025 at 9:10 PM


Topic: 2005 ram, remote start won’t start

Posted By: illegalspeeds
Subject: 2005 ram, remote start won’t start
Date Posted: September 22, 2009 at 11:23 AM

Installing Python 872 in my 2005 Ram SRT-10, along with XK531 bypass.  Truck will not start with remote.  Won't even crank.  What am I doing wrong?  I have connected Ign and 2nd Ign, along with the starter wire.  I found the 2nd accessory wire (14ga pink / YELLOW), but there are no dk. blue and pink / YELLOW 16ga wires in the harness that I can find.  It will start via the remote when I turn the ignition on with the key.  Please help, I'm going out of my mind here. 

Matt




Replies:

Posted By: illegalspeeds
Date Posted: September 22, 2009 at 5:28 PM
Figured it out, for those who have future issues...in the Directwire, where it says "Third Ignition, pink / YELLOW 10ga, not required for remote start, only powers windows..."  Well, not so much.  I powered up that wire and it worked like a charm.


Print Page | Close Window