transponder bypass, 2000 pontiac grand prix

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116506
Printed Date: July 07, 2025 at 10:32 PM

Topic: transponder bypass, 2000 pontiac grand prix

Posted By: kentbo12
Subject: transponder bypass, 2000 pontiac grand prix
Date Posted: September 23, 2009 at 3:26 PM

I am installing a Universal Learning Bypass Module on my 2000 Pontiac Grand Prix GTP.

I need to connect a wire on the 8 pin harness to a 12v constant power fused at 3 amps. I don't know where to find a wire that is already fused at 3 amps on or near the steering column. Does anyone know how to find that out, or should I try to find a 3 amp inline fuse to connect to the wire?

Replies:

Posted By: t&t tech
Date Posted: September 23, 2009 at 3:38 PM

You could prolly search that entire car and you won't find a twelve volts fused at three amps, lol, what that means is, you would have to fuse your power wire with a three amp fuse! posted_image

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: kentbo12
Date Posted: September 23, 2009 at 4:10 PM

That's kinda what i thought.

Any idea on where to get a 3a inline fuse? I have looked a little with no success.

Thanks

Posted By: JWorm
Date Posted: September 23, 2009 at 6:54 PM

You can make your own. I've done this thousands of times installing and it works fine. I tape the electrical connectors together with electrical tape. Works fine for fusing small current devices (less than 15 amps).

Click here

Print Page | Close Window