python 1600xp starter kill

Thanks in advance. Just ordered a Python 1600XP. Now I'm wondering if the sat. box that controls the remote start also controls the Starter kill. I searched the alarm on the board, and the question was brought up, but I didn't really see a good answer to the question. So, does the alarm have the starter kill relay already build in. I have a 610T relay, but I'm wondering if I have to cut the starter wire for remote start, would I have to cut the starter wire again to install this relay.

if the alarm asks you to cut the starter wire then it has a starter kill. if it asks you to tak the starter wire then theres no starter kill. place your starter kill relay in line on the key side of where the alarm taps in so the remote start will still work with the kill switch engaged. unless ur using the GWA wire but i suggest you keep the starter kill separate from the alarm to make it more secure.

i meant to say tap not tak

That alarm would have the starter kill built in with the relay pack! No need for your additional relay, just wire the relay as per the booklet!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Yeah, it asks me to cut the starter wire, so that answers my question thanks.

No problem!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

does anyone have the wiring diagram for this alarm so that I can get a heads up before it gets here, and by chance does it come with a blue led instead of red