disarming problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116560
Printed Date: June 08, 2024 at 4:26 PM

Topic: disarming problem

Posted By: tony0819
Subject: disarming problem
Date Posted: September 26, 2009 at 9:57 PM

hi

i have a autopage rs850LCD, whenever the alarm is triggered, it will stay in the mode that tells you it has been triggered, so instead of 2 chirps upon disarm it turns into 4. is there a way to reset it back to 2 chirps without pulling the battery?

thanks in advance

Replies:

Posted By: t&t tech
Date Posted: September 27, 2009 at 12:03 AM

Normally, most alarms reset when the igntion is switched on! Key word in that sentence being normally!

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: KarTuneMan
Date Posted: September 27, 2009 at 12:59 AM

So what your alarm is doing.... is "normal" function. And as t&t stated, it will reset with ign. pulsed.

-------------

Posted By: tony0819
Date Posted: September 27, 2009 at 3:31 PM

turns out the igition wire from the brain isn't connected. Hence it wasn't acting normally. got that fixed, everything works as it should now. thanks

Print Page | Close Window