door open trigger wire, 04 maxima
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116598
Printed Date: July 05, 2025 at 4:47 PM
Topic: door open trigger wire, 04 maxima
Posted By: toby12188
Subject: door open trigger wire, 04 maxima
Date Posted: September 28, 2009 at 11:14 PM
I'm wanting to add RAP to my car (2004 Maxima) using the 3 relays detailed here:
but i'm new to these diagrams and i'm not sure exactly where to put the two diodes that it says it needs. I'm going to attempt to walk through the diagram so please correct me if i'm wrong:
i'm going to take the wire that turns the radio on that comes from the accessory circuit and hook it up
first to pin 86 on the far-right relay
on the far left relay, i'm going to put a diode between the accessory circuit and pin 86, and i'm going to put another diode AFTER the first diode connecting pins 86 and 87, and the radio is connected to pin 87.
all the rest of the connections are self-explanatory enough for me to wrap my head around, but am i thinking correctly about the diodes?
ALSO I need to know if anybody has information on where i can tap the door trigger wire?
Thanks
-------------
I didn't do it. *nodnod*
but i'm new to these diagrams and i'm not sure exactly where to put the two diodes that it says it needs. I'm going to attempt to walk through the diagram so please correct me if i'm wrong:
i'm going to take the wire that turns the radio on that comes from the accessory circuit and hook it up
first to pin 86 on the far-right relay
on the far left relay, i'm going to put a diode between the accessory circuit and pin 86, and i'm going to put another diode AFTER the first diode connecting pins 86 and 87, and the radio is connected to pin 87.
all the rest of the connections are self-explanatory enough for me to wrap my head around, but am i thinking correctly about the diodes?
ALSO I need to know if anybody has information on where i can tap the door trigger wire?
Thanks
-------------
I didn't do it. *nodnod*
Replies:
Posted By: chev104275
Date Posted: September 29, 2009 at 5:32 AM