programming instructions for dei 455j
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116643
Printed Date: May 02, 2024 at 10:03 AM
Topic: programming instructions for dei 455j
Posted By: rmp1426
Subject: programming instructions for dei 455j
Date Posted: October 01, 2009 at 10:21 AM
2000 Jeep Grand Cherokee Locks Does anyone know where I can find programming instructions for DEI-455J? or does someone know how to?
Replies:
Posted By: tommy...
Date Posted: October 01, 2009 at 10:24 AM
https://www.the12volt.com/installbay/file.asp?ID=611------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: rmp1426
Date Posted: October 01, 2009 at 10:45 AM
Hey!! Thanks! i have that one.. I'm trying to re-program the remotes. I can't lock/unlock the doors from the remote, just the remote start....
Posted By: tommy...
Date Posted: October 01, 2009 at 10:50 AM
OK...I dont follow...The keyless entry is NOT working on the remote start remote...? Did it ever...? Can you hear the relays clicking when pressing lock/unlock...? And your saying that the vehicle is still remote starting from remote...Just no lock/unlock...?
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: rmp1426
Date Posted: October 01, 2009 at 10:59 AM
I"m not sure if it ever did, I just bought the truck... I see the black box under the dash... the lady that owned the truck before me had her pocket book stolen, in there were the factory remotes. Its a pain in the ass trying to manually lock and unlock.. When i press the louck/unlock bottons on the remote, the lights flash but does nothing... The only function I have on the remote is the remote start..
Posted By: tommy...
Date Posted: October 01, 2009 at 11:31 AM
Was the door locks connected to the 455j from the remote start...? There should be a diagnostic plug at drivers under-dash...This is where the data wire is attached...Can you see this connection...? On most units the lock and unlock are green and blue...The 455j is just an interface for the door locks...It is not the remote start...! You are probably going to have to dig a little deeper in the dash to find the remote start...There should be a 2or 3 pin harness for the lock and unlock wires...Follow these as they should attach to the green and blue on the 455j... ------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: JWorm
Date Posted: October 01, 2009 at 6:56 PM
The 455J does not require any programming. When you connect it correctly, it just works. Either a wiring issue, something came unplugged, or something is defective. I don't think I ever saw a defective 455J.
Posted By: rmp1426
Date Posted: October 01, 2009 at 10:08 PM
ok.. what should i be looking for?
Posted By: JWorm
Date Posted: October 01, 2009 at 10:47 PM
You need to take a multimeter to the 455J and test to see if all the wires are connected correctly. Does it have power? Ground? Door lock wires connected and getting (-) pulse signals when you use the remote? Is the data wire connected to the OBDII wire? If you take a jumper wire and tap ground to either the lock or unlock input does it do anything? Is the fuse blown for the 455J?
Posted By: tommy...
Date Posted: October 02, 2009 at 7:47 AM
tommy... wrote:
Was the door locks connected to the 455j from the remote start...? There should be a diagnostic plug at drivers under-dash...This is where the data wire is attached...Can you see this connection...? On most units the lock and unlock are green and blue...The 455j is just an interface for the door locks...It is not the remote start...! You are probably going to have to dig a little deeper in the dash to find the remote start...There should be a 2or 3 pin harness for the lock and unlock wires...Follow these as they should attach to the green and blue on the 455j...
------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: rmp1426
Date Posted: October 02, 2009 at 11:38 AM
Im not sure if they were ever connectd to the doorlocks.. I will checking all this out tomorrow.. Thank you everyone for the info... I will keep everyone posted on how I make out...
Posted By: sshetter
Date Posted: January 03, 2011 at 6:37 PM
i am installing a starter in my 2002 wj and having alot of trouble with this dei 455j system. it locks and unlocks all other doors except the drivers door, and im assuming doesnt bypass the security system because after the engine starts it shuts off right away. anyone know what and where the wires go?
|