Print Page | Close Window

2008 sierra with factory start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116663
Printed Date: May 06, 2024 at 1:42 PM


Topic: 2008 sierra with factory start

Posted By: suzuki7
Subject: 2008 sierra with factory start
Date Posted: October 02, 2009 at 12:11 PM

Hi, does anyone know if there is a location with all necessary rem start wiring if the Sierra has a Factory remote Starter?  And Any addtl info on the 1300 ohm resistor for the start wire?  I can't find direct fax 1607, does it need a relay or diode isolation?  Thanks.

-------------
The best way to predict the future is to create it!



Replies:

Posted By: xtremej
Date Posted: October 02, 2009 at 2:38 PM
The factory remote start is built in to the bcm.





Print Page | Close Window