viper 5101 neutral safety problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116799
Printed Date: July 12, 2025 at 8:15 AM

Topic: viper 5101 neutral safety problem

Posted By: rcoe
Subject: viper 5101 neutral safety problem
Date Posted: October 08, 2009 at 9:28 AM

First time doing one of these Vipers and running into a problem with the neutral safety switch.

I do have the blk/wht wire on the correct harness grounded and have checked with a meter.

Still everytime I trigger the remote start I get 8 clicks telling me neutral safety fault. Everything else is working great just cannot get it to even attempt to start. I can change it to the manual trans setting and then I get 7 clicks.

Any ideas?

Thanks.

Replies:

Posted By: rcoe
Date Posted: October 08, 2009 at 9:50 AM

Found the fix. Need to have the valet switch hooked up.

Print Page | Close Window