1996 suzuki x 90 / avital 2101l

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116813
Printed Date: May 13, 2025 at 6:53 PM

Topic: 1996 suzuki x 90 / avital 2101l

Posted By: knightrider2000
Subject: 1996 suzuki x 90 / avital 2101l
Date Posted: October 08, 2009 at 5:39 PM

Hey Guys,
I am in need of some help here
I am installing an Avital 2101L keyless entry into a 1996 Suzuki x-90.
The System is working great, as long as i don't press the lock/unlock switch in the door, then it cooks the circuit board in the door switch, (no big deal i can repair that circuit board)
But i need to figure out why it is doing this, and make it stop.

The door locks have 12 volts on them until you press the button, then it drops to zero. (both lock and lock are this way)

I have scanned in the wiring portion of the book, i hope it can help, in figuring out my problem.

Here is what i have hooked up where:
h1/1     12volt constant
h1/3     12volt
h1/6     12volt
h1/7      ground
h1/9     ground
h1/11     ground
h1/15     12volt
h1/17     ground.

Thanks!

posted_image

Replies:

Posted By: ckeeler
Date Posted: October 08, 2009 at 5:59 PM

what wires are you using for lock/unlock?

Posted By: knightrider2000
Date Posted: October 08, 2009 at 7:50 PM

Guess that would help huh? LOL
Sorry bout that
i am using:
H1/5 to Pink in drivers kick panel
and
H1/8 to Pink/black in drivers kick panel

I read over on bulldog security's site that it is a type b system, if that helps any.

Thanks for the Reply!

Posted By: 91stt
Date Posted: October 08, 2009 at 9:56 PM

There should be no connection on H1/6 and H1/17

Posted By: 91stt
Date Posted: October 08, 2009 at 9:56 PM

*** double post :( ***

Posted By: knightrider2000
Date Posted: October 09, 2009 at 10:30 AM

Thanks man,
i will give it a shot this weekend and post back..