Print Page | Close Window

remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116864
Printed Date: July 14, 2025 at 6:53 PM


Topic: remote start

Posted By: sravi13
Subject: remote start
Date Posted: October 10, 2009 at 7:15 PM

i got a viper remote start and security..got it installed. the thing is..if i lock the car wiht the jeep keys..then use the viper remote to start the car..the car alarm goes off...if i lock the car with the viper and start it, it works fine no alarm. is that how its soppose to be?



Replies:

Posted By: i am an idiot
Date Posted: October 10, 2009 at 7:50 PM

If you did not connect the factory disarm wire, then yes that is how it is going to work.




Posted By: Velocity Motors
Date Posted: October 10, 2009 at 10:29 PM
What bypass module did you end up installing ? Is it one with the door lock interface as well as bypass or just the bypass ? As stated above, if you installed a bypass only module, you would still have to connect the OEM alarm disarm wire from the Viper to the Jeep's disarm wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window