01 crv with clifford matrix rs iii issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116964
Printed Date: June 10, 2024 at 4:05 AM
Topic: 01 crv with clifford matrix rs iii issue
Posted By: elsabaw
Subject: 01 crv with clifford matrix rs iii issue
Date Posted: October 14, 2009 at 8:11 PM
I had left the car at the shop to be serviced. Check engine light was on and a valve adjustment cleared it. Next the car was tinted at another shop, doors open and windows constantly going up and down during window tinting. I had left the car unlocked so that the shop guys can just lock the car manually while I had the transmitter. All is done, my transmitter is communicating properly with the car. All functions are normal, lock-unlock-trunk release-remote start. But the icons does not correspond with the function. I press lock and the car locks but the icon doesn't change to the lock symbol. Transmitter beeps as if it didn't receive the command. All other functions work except the transmitter doesn't confirm with appropriate beeps and icons. This has never happened before. Is there something brewing with the system?
-------------
Tony G
Replies:
Posted By: t&t tech
Date Posted: October 14, 2009 at 8:39 PM
Look o the remote, there should be a small number icon, 1, 2, 3, 4, the remote should be on one, if it is, try diconnecting the antenna, and remove the battery from the remote, leave for a few mins and the try again!
Posted By: elsabaw
Date Posted: October 14, 2009 at 9:13 PM
Thank you but there are no numbers icons showing. Also are you talking about the antenna in the car? Please see link, download owners guide and advise, thank you.
https://safemanuals.com/user-guide-instructions-owner-manual/CLIFFORD/MATRIX%20RS%20III
-------------
Tony G
|