dei document 1070
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116968
Printed Date: July 09, 2025 at 7:47 PM
Topic: dei document 1070
Posted By: t&t tech
Subject: dei document 1070
Date Posted: October 14, 2009 at 10:58 PM
I'm trying to upload this note on my pc, with no success, can anyone brief me on what it says! Thanks in advance
Replies:
Posted By: howie ll
Date Posted: October 15, 2009 at 1:15 PM
Check your emails.
Posted By: t&t tech
Date Posted: October 15, 2009 at 6:01 PM
It still isn't opening on my pc howard, i dunno why, could you or anyone else who can possibly PM me the wording,i would appreciate it, Thanks anyway howie!
Posted By: t&t tech
Date Posted: October 18, 2009 at 10:13 AM
Anybody? Please, im practically begging here!
Posted By: metz35
Date Posted: October 18, 2009 at 10:54 AM
It's just the Toyota Lexus door lock wiring diagram with relays and diodes
Posted By: t&t tech
Date Posted: October 18, 2009 at 3:35 PM
i know, i'm having problems uploading it, i just wanted a copy of the file!
Posted By: Mike M2
Date Posted: October 18, 2009 at 5:08 PM
I have it as a PDF file but can't figure out how to copy it! I'll work on it, or maybe i can just tell you what it says. What car?
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: howie ll
Date Posted: October 18, 2009 at 5:23 PM
Darren, I sent you that file as an email attachment a good week ago also with a picture showing the door wiring in a R/hand drive RX300. What hapened to that? do you want me to do the email again?
Posted By: t&t tech
Date Posted: October 19, 2009 at 6:00 PM
No howard! It isn't opening on my pc! Mike i would appreciate it if you told me what it said!
Posted By: t&t tech
Date Posted: October 19, 2009 at 6:01 PM
Lexus IS300
Posted By: Mike M2
Date Posted: October 20, 2009 at 3:01 PM
Ok, here goes. At the drivers door module, Use 1 relay, 86 12 volts, 85 alarm lock wire, cut the blue/black- one end to 30, other end to 87A(doesn't matter which side). Take the GREEN/ red and tie it into the lock wire attached to 85. Unlock from the alarm gets split and goes to both blue/black and GREEN/ black. Diode both of these wires, band towards the alarm. Thats it, 1st unlock pulse does drivers door, second does the rest....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: t&t tech
Date Posted: October 20, 2009 at 3:53 PM
Thank you!
|