oem power doors
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116969
Printed Date: July 07, 2025 at 8:03 PM
Topic: oem power doors
Posted By: eclipse00gt
Subject: oem power doors
Date Posted: October 14, 2009 at 10:59 PM
First of all, hello fellow electrical gurus. A little background info, I have 2000 astro van all manual, and one door was bent. So I bought the doors of a 2003 astro van which was all power. Now my question is how can I, if its possible at all, connect the power locks, power window, and the power mirrors to make them work?
The doors came with all switches and I have some wire slack from the door.
Replies:
Posted By: t&t tech
Date Posted: October 15, 2009 at 7:03 AM
here's a little wiring diagram, the locks are said to be positive trigger from factory, but i assume you would be using two relays for this, you can wire it for negative trigger! It won't make a difference!
Posted By: t&t tech
Date Posted: October 15, 2009 at 7:05 AM
Posted By: t&t tech
Date Posted: October 15, 2009 at 7:06 AM
The output terminals of the switch will be conecting to pin 86 of the left relay and pin 85 of the right relay!
Posted By: eclipse00gt
Date Posted: October 17, 2009 at 1:05 AM
got it! thanks for the replies! Now could that work for the windows as well?
Posted By: i am an idiot
Date Posted: October 17, 2009 at 1:54 AM
Yes the same type of relay setup will work for the windows.
|
