dei 530t driver lock button
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117027
Printed Date: July 07, 2025 at 2:05 PM
Topic: dei 530t driver lock button
Posted By: carlos8126
Subject: dei 530t driver lock button
Date Posted: October 17, 2009 at 11:40 AM
Hello, I just installed the module in my car (nissan patrol, not sold in us) The module is working fine it roll the windows up and down fine.
The problem i have is the lock button on my side is not working, so any passenger can roll the windows down (kids) and i think is very unsecured.
Does anyone knows a way around this?
My friend who installed it said it was connected as stated in the manual.
Replies:
Posted By: howie ll
Date Posted: October 17, 2009 at 11:49 AM
The only way round this would be either to rewire the lock button to switch one of the motor switch side wires going to the passenger windows. Or place a separate switch somewhere to do the same for the other three windows, 1 switch, 3 x relays.
Posted By: carlos8126
Date Posted: October 17, 2009 at 2:16 PM
Let me see if i got it...
option 1 is to use the switch on the drivers door to control only 1 of the modules right?
The 2nd option is to use 3 relays 1 for each door and control them with the drivers door switch?
If i do option 1 or 2 will they also work when the alarm roll them up or down regardless of the switch position?
Thank you for your answer.
Posted By: howie ll
Date Posted: October 17, 2009 at 6:16 PM
Just thinking this through, see what the lock button does, but I think it's unworkable in the sense that if you get the lock button to work you will lose the arm+window close facility.
|