2007 nissan maxima smart key bypass?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117031
Printed Date: July 06, 2025 at 5:23 PM

Topic: 2007 nissan maxima smart key bypass?

Posted By: dcman41
Subject: 2007 nissan maxima smart key bypass?
Date Posted: October 17, 2009 at 1:17 PM

Hi, i am looking to do a viper 5901 in a 2007 nissan maxima with smart key, but NOT push to start. IE...you still have to turn the ignition cylinder like you would a normal car to start it. Which bypass should i use ? The XK07? I just want to make sure this is the lastest bypass for this car before i purchase everything. Any input is appreciated.

Thanks

Replies:

Posted By: metz35
Date Posted: October 17, 2009 at 2:12 PM

that will work with pkn3 software installed on it....
or you can use fortin can-sl2 module does everything
locks, factory alarm, key bypass, tach, much more stuff...

Posted By: Chris Luongo
Date Posted: October 17, 2009 at 10:08 PM

XK07 works just fine but is extremely basic. Transponder bypass only. Doesn't allow key takeover.

CAN-SL2 works just as well, doesn't really cost any more, and adds all kinds of extra cool inputs and outputs. Also doesn't allow key takeover.

Various products from ADS (idatalink.com). They say they've recently resolved the takeover problem, but I'm not sure if it works on all Nissans or not.....contact them and make sure it works for your car.

Print Page | Close Window