viper 300 esp car alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117048
Printed Date: July 05, 2025 at 11:38 PM
Topic: viper 300 esp car alarm
Posted By: z190074
Subject: viper 300 esp car alarm
Date Posted: October 18, 2009 at 9:55 AM
How do i disable a viper 300 esp car alarm. I bought a 1988 bmw with this alarm installed which i thought was disabled. i have no remote. i replaced the cars battery and now the alamr is sounding and i cant stop it. ive tryed the valet button to no avail.. HElP!
-------------
z190074
Replies:
Posted By: howie ll
Date Posted: October 18, 2009 at 9:59 AM
Turn on ignition, driver's door open, push valet button twice?
Posted By: z190074
Date Posted: October 18, 2009 at 11:24 AM
I did... I tried up to 5 times starting with pushing valet button once... The manual said it could be programed for up to 5 pushes, so I tried all..Still nothing, alarm keeps sounding and the starter is dead.
-------------
z190074
Posted By: chriswallace187
Date Posted: October 18, 2009 at 5:10 PM
Try pushing and holding the valet switch.
Also if you don't care about actually using the alarm, just pull the main power fuse to the brain. It should start at that point.
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: z190074
Date Posted: October 20, 2009 at 5:55 AM
I want to thank everyone for their help, i was able to get the vehicle running by cutting the main power to the unit. I ended up removing the entire alarm system. Again THANK-YOU!
-------------
z190074
|