Hello,
I have mounted on my car a Ungo S670 system (i think is the same unit like Hornet 645T but "ungo" branded with some design modifications). I adapted the auxiliary channels to control folding mirrors and a Webasto heater. Devices working correctly but i need a page confirmation for heater channel. According to owner manual " < size=5 face=AGaramond-Regular>< size=5 face=AGaramond-Regular>When a command (arm/disarm, or auxiliary channel) from the transceiver is sent and received, the system will send a command page back to confirm receipt" but system does not send back any confirmation. I appreciate if someone who uses this system can tell me if you receive a page confirmation when operating auxiliary channels . Also, i want to know if this option can be enabled somehow - maybe via DEI 998T Bitwriter programmer , and what are the "secret" functions which can be accessed with this programmer. Unfortunately, my country dealer could not give me a clear answer about this. Thanks.
not sure of any secret functions...It just makes changing the programmable features easier to fine tune/toggle...
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
In agreement with tommy, it does however allow access to some "secret" features that aren't accessible from the valet button, they will be listed in the manual!
Unfortunately the manual is rather unclear about these issues.Only I would know if page confirmations for auxiliary channels can be activated with programmer.Really i don't know even if this system in compatible with Bitwriter. These days i want open unit to see if inside is any connector for programmer.I send a email to DEI and, meanwhile maybe they send me an answer.
On the unit should have a black three pin port present, if you see it, it's bitwriter compatible!