95 hardbody blower motor and r.s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117113
Printed Date: May 14, 2024 at 8:36 PM

Topic: 95 hardbody blower motor and r.s

Posted By: coolen
Subject: 95 hardbody blower motor and r.s
Date Posted: October 20, 2009 at 12:20 PM

Well it's that time of year again, and i want my blower to defrost for me. I had not originally hooked up that white +12v accessory wire. I went to do it the other day and come to find out-my truck is negative switched for the blower for each setting. So, my question is, can I go straight to the motor itself?

Thanks

1995 Nissan Hardbody v6

cm3000 model comustar

Replies:

Posted By: t&t tech
Date Posted: October 20, 2009 at 4:30 PM

Won't it be easier to power the accesory wire and leave the blower on at the desired setting! And yes you can go straight to the motor itself!

Posted By: coolen
Date Posted: October 20, 2009 at 8:48 PM

ok, this makes sense. I obviously didn't pick up on it at the time of the install. When you say power the accessory wire, that would be one in my ignition harness correct? That makes more sense to have a way to power everything. I found it kind of strange that there was only one accessory power wire with this unit. Is that common to all other models out there?

Thanks

Posted By: t&t tech
Date Posted: October 20, 2009 at 9:48 PM

No most models would carry wires to accomadate additional accesory or ignition wires! Yes the wire in your ignition harness would be the one i am talking about

Print Page | Close Window