561t to hornet 740t 96 gmc suburman

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117185
Printed Date: August 27, 2025 at 11:54 AM

Topic: 561t to hornet 740t 96 gmc suburman

Posted By: hysider246
Subject: 561t to hornet 740t 96 gmc suburman
Date Posted: October 23, 2009 at 10:46 AM

Hello all! I recently installed a Hornet 740T on my 96 Surburban and just purchased a 56iT so that I could remot start the vehicle. The 561T has more wires than the alarm that i instaled, I know that all wires are not needed for the installation, but just don't know which are need? Is there a diagram anywhere that show a remote start unit added to an aftermarket alram system? Also will I need a bypass? Any input on this matter would be greatly appreciated. Thanks

Replies:

Posted By: boxhead78
Date Posted: October 25, 2009 at 11:28 AM

go look for the vehicle wiring for 96 surburban

-------------
boxead78

Posted By: t&t tech
Date Posted: October 25, 2009 at 12:02 PM

this, diagram makes no mention of a factory immobilser, i cannot confirm this however!

Also what wires are you unsure about on the unit?

Posted By: hysider246
Date Posted: October 25, 2009 at 10:21 PM

I am fairly new to the site and thanks for the info to find the chart. Really confused on which wires are to be conected to the existing alarm, just the ingnition out? Thanks

Print Page | Close Window