06 pt cruiser and ads tbsl c2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117247
Printed Date: May 19, 2024 at 11:32 AM
Topic: 06 pt cruiser and ads tbsl c2
Posted By: bruc007
Subject: 06 pt cruiser and ads tbsl c2
Date Posted: October 25, 2009 at 7:23 PM
I have an 06 PT Cruiser to do soon and am looking at the ads-tbsl-c2 bypass kit.I have had success with this brand before and it doesn't seem to difficult.The instructions say to only hook the wires from the bypass to the Ign,Starter wires.does that mean no wires are to be connected from the remote unit? Sorry if that seems stupid ,but I would rather check things out before diving in..If anyone has any suggestions or tips about problems with this vehicle it would be appreciated..
Thanks
B Marshall
Replies:
Posted By: ceasar326
Date Posted: October 27, 2009 at 1:55 PM
Ive done simular car detail. 08 sebring conv.. ive only connected all the main things like lights, brake light, all the other stuff like starter and ign were provided by the bypass. so didnt need to hook the starter wire of the brain and ign wire. Hope this helps. What type of remote start are u goung to use?
Posted By: bruc007
Date Posted: October 27, 2009 at 7:32 PM
Its a CTC Prostart made by Autostart with an Idatalink bypass which connects directly to this remote module
|