Print Page | Close Window

07 odyssey, bulldog deluxe 500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117280
Printed Date: May 15, 2024 at 4:33 AM


Topic: 07 odyssey, bulldog deluxe 500

Posted By: dasbogie
Subject: 07 odyssey, bulldog deluxe 500
Date Posted: October 27, 2009 at 2:57 AM

Hello, I have an 07 Honda Odyssey that I've almost got buttoned up with this Bulldog.   I need to get the Factory alarm disarm wire, and I read a couple posts on here that most installers find it in the door.  On this bulldog model, the factory alarm disarm wire is also the status output for the remote start.  You can program what you want.  I need this wire on the bulldog to for both functions.  There are various other outputs on this bulldog, like 2nd starter, 3rd ignition, bunch of auxs.  What is the best method for tying into FAD and Status output to bypass.  Thanks .




Replies:

Posted By: i am an idiot
Date Posted: October 27, 2009 at 3:19 AM
Use the negative door unlock pulse for FAD.



Posted By: dasbogie
Date Posted: October 28, 2009 at 3:14 PM
I guess I didn't need that after all but in the future I will try your suggestion.  Those lock wires are not fun to splice into in this vehicle. 


Print Page | Close Window