keyless entry module on 1999 eclipse

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117293
Printed Date: May 15, 2025 at 1:58 AM

Topic: keyless entry module on 1999 eclipse

Posted By: installerman23
Subject: keyless entry module on 1999 eclipse
Date Posted: October 27, 2009 at 4:16 PM

Anybody know how to disable the factory keyless entry?? The customer lost the factory transmitters in front of his house and doesn't want anybody to have access to his car.Thanks

-------------
installing, one day at a time..

Replies:

Posted By: tommy...
Date Posted: October 27, 2009 at 4:38 PM

I know on some units when you are re-programming remotes...It gives you an option to clear/erase all originally programmed fobs...See if i can find out for ya...Is the customer plan on purchasing a new remote...?

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: installerman23
Date Posted: October 28, 2009 at 10:10 AM

Thanks for the reply.I was installing a new clifford and the customer didn't want the factory keyless entry to work because he lost 1 of the remotes in front of his house.......I found the keyless entry module behind the driver side rear panel and cut the red power wire for it.I found out if you disconnect the keyless entry system completely,the driver door unlock won't work.Hope this helps someone else out.

-------------
installing, one day at a time..

Print Page | Close Window