2004 malibu wiring trouble info needed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117311
Printed Date: May 15, 2025 at 9:28 PM

Topic: 2004 malibu wiring trouble info needed

Posted By: m1kebab
Subject: 2004 malibu wiring trouble info needed
Date Posted: October 28, 2009 at 7:17 AM

I am hooking up a python 580 in my 2004 malibu. I have everything hooked up except the remote start. I have many wiring diagrams for my car and they all say that there is no starter wire on my ign. harness. can any tell me what to do. I know that when my car sees voltage on the IGN. wire and a drop of voltage on the ACC. wire the computer will crank the starter. Can anyone tell me what to hook up to get it to start. Any help would be greatly appreciated.

Also I have a DEI DLPK interface. I hooked it up and the light came on. I checked my D2D cable from the python and I have 12 volts and ground feeding into the bypass. Is there any way to tell if the bypass is Bad?

Replies:

Posted By: tommy...
Date Posted: October 28, 2009 at 8:17 AM

These are tough cars for beginners...The manual for the bypass should have all the wording/instructions you need...Maybe its time to seek a professional...?

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: ceasar326
Date Posted: October 28, 2009 at 3:38 PM

Make sure you use the most up2date manual.

https://www.xpresskit.com/DocumentDownload.aspx?documentid=1378&productid=122&firmwareid=659

Double check your wires and manuals for the right wires..