Print Page | Close Window

07 ram 3500 6.7 dies, rem start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117319
Printed Date: May 16, 2025 at 3:22 PM


Topic: 07 ram 3500 6.7 dies, rem start

Posted By: portugal-alvaro
Subject: 07 ram 3500 6.7 dies, rem start
Date Posted: October 28, 2009 at 12:12 PM

Installing a Zenesis 2 way alarm/starter combo with a fortin duo can 2 module kit.

was able to program interface module and all alarm functions are working. door lock. triggers etc. Connected the alarm using the doc 1084 found on this site but starter will not engage at all, all ignition functions work but the starter will not turn on. PLEASE HELP!!!



-------------
portugal-alvaro



Replies:

Posted By: syl20rochon
Date Posted: October 29, 2009 at 6:05 PM
Can you describe how you've connected your bypass module, sounds like it is not connected properly or wrongly programmed, give a description of what you did with all the wires on the bypass.....I'll see if I can help

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.



Posted By: portugal-alvaro
Date Posted: October 30, 2009 at 3:59 PM

Thanks i'll open it up and post again



-------------
portugal-alvaro



Posted By: Velocity Motors
Date Posted: October 30, 2009 at 4:11 PM
If the truck has a starter wire, you must hook up the YELLOW starter wire from the DUO-CAN to the vehicle starter wire as well as the starter output from the Zenesis system. 

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window