Print Page | Close Window

rem start and kill switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117324
Printed Date: May 20, 2025 at 12:33 AM


Topic: rem start and kill switch

Posted By: joebobrei
Subject: rem start and kill switch
Date Posted: October 28, 2009 at 2:04 PM

hey

ive recentley put in a hidden switch in my car to break the contact  on the starter motor from the ignition, but my problem is  my remote start will not work  unless the circuit between the starter and the ignition is closed. i would have to go outside flip he switch start the car and go back in side . this would defeat the purpose  and take away the convenience of having the remote start. can anyone  shoot me a diagram that could fix this for me. ive got  a relay and a momentary push button switch, which i would like to incorporate instead of the toggle.

ive always been intrested in electronics and  i would consider myself a step or 2 above a novice tech but  its a little difficult wrapping my head around some of these circuits. if  anyone can help my out, i would gratley appreciate it . 

thx allot




Replies:

Posted By: t&t tech
Date Posted: October 28, 2009 at 2:44 PM

If it's just the starter motor you have interrupted, then you can just connect the starter output to the point after the relay! The only drawback is that the relay will buzz momentarily everytime the remote starter engages!




Posted By: ceasar326
Date Posted: October 28, 2009 at 3:18 PM

posted_image

Try hooking it like this and hooke the starter wire from your remote start to the motor side wire.




Posted By: joebobrei
Date Posted: October 28, 2009 at 3:49 PM

ok ill try that  out tommorow. I guess ill need another relay   thx allot


Print Page | Close Window