Print Page | Close Window

idatalink products

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117364
Printed Date: May 15, 2024 at 9:21 PM


Topic: idatalink products

Posted By: Thack79
Subject: idatalink products
Date Posted: October 30, 2009 at 1:54 PM

wanna to try to idatalink products. where is the best place to get a loader and the most common bypass to start with before i call to open an account with them.

thanks

jason




Replies:

Posted By: Velocity Motors
Date Posted: October 30, 2009 at 3:31 PM
Just go directly to idatalink and purchase it from their store. The best kit if it's not for a Compustar system is the ADS-AL-CA and if you have a Compustar Blade ready CPU, use the BLADE-AL. You can get a package deal with a loader on their site.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Mike M2
Date Posted: October 30, 2009 at 6:49 PM
The loader is pretty cheap. If you plan on using Idata more than a few times it is definately worth getting. I keep two in my work van(we do dealer work) and connect to my laptop for on the spot flasfing. I gotta say i do love the product, we can carry 4 different units units and flash them for any car out there at the last minute.

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: Thack79
Date Posted: October 31, 2009 at 12:02 AM

perfect. Just spoke with Lily. thanks all





Posted By: Chris Luongo
Date Posted: October 31, 2009 at 3:05 PM
Maybe you've already ordered, but they've got a couple of package deals on their website that gives you the loader, one or two modules, and a T shirt.

Also, a summary as to their kits:

Solo Series (less expensive): Comes preloaded for one "family" of cars. Can be updated to newer firmware, but you can't change from, say, a Nissan to a Honda.

Multi Series (more expensive than Solo): Comes with no firmware whatsoever, but you can use the loader to put whatever you want on it.

Omni Series (more expensive than Multi): Comes with the firmware for LOTS of different cars preloaded. (Omni is intended for on-the-road installers, or others who don't have Internet access to flash modules.)


In summary: Let's say, for example, that you do a whole lot of Nissans and Toyotas, but only rarely see Hondas or Chevrolets.

You'd probably want to have a healthy stock of Solo Series for your Nissans and Toyotas, because they cost less and you know you'll use them.

You wouldn't want to order a Solo Series for a Honda, because it would sit on the shelf forever.

So you'd keep a handful of Multis in stock, because you know that when that rare Honda or Chevy comes in, you can do the job without ordering product, even though the Multi does cost more.

And again, if for some reason you run out of your Nissan Solo pieces and another Nissan shows up....just eat the extra cost and use a Multi for that, too.





Posted By: Thack79
Date Posted: November 02, 2009 at 7:31 AM
Thanks Chris for the detail. I order a ton of bypasses last year and yeah they are still sitting there lol  (that is if they even work. the last couple have not).  Drawback is they dont d2d wit the alarms i use but at this point I just need these things to work.





Print Page | Close Window