2010 corolla aftermarket power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117370
Printed Date: May 11, 2025 at 7:28 AM

Topic: 2010 corolla aftermarket power windows

Posted By: desh187
Subject: 2010 corolla aftermarket power windows
Date Posted: October 30, 2009 at 10:39 PM

Has anyone installed aftermarket power windows on 2009 or 2010 Toyota Corolla? Is it similar to the previous model 07/08 type.There is this hollow space where the oem window switches are so where do the aftermarket switches go?
Thanks

Replies:

Posted By: beegbie
Date Posted: October 31, 2009 at 4:54 PM

I've done power windows in new corollas but only with the "pod" style switch bezels. It did look like there is plenty of room for the switches where the factory switches go if you could flush mount them.

Posted By: howie ll
Date Posted: October 31, 2009 at 6:14 PM

Why not make your wiring job a lot easier, also better if you're going for window close at some stage and mount the switches in the centre console.

Posted By: desh187
Date Posted: November 01, 2009 at 1:32 AM

Hi Beegbie,
Where did you get the power and acc from?

Posted By: beegbie
Date Posted: November 01, 2009 at 5:45 AM

I used the large white wire at the fuse box as the feed for a relay. Used the small accessory wire at the ignition switch to trigger the relay.

Print Page | Close Window